top of page

KEEP YOUR PIPELINES RUNNING WITH OUR LINE HEATERS 

Line heaters, also known as indirect fired heaters, are widely used in heating the water, oil, and gas pipelines.  At Moss Fabrication Ltd., we fabricate line heaters in compliance with CSA B149 up to 5 mm BTU/Hr. We build indirect fired heaters utilizing either natural gas, fuel gas, or electric heating coils. We have experience in sweet gas, sour gas, and oil process fluids in standard and low temperature designs. Contact us today for more information about our line heaters.  


How Do In-line Heaters and In-line Duct Heaters Work?

In-line heaters and in-line duct heaters use the heat transferred from a hot to a cold body, ensuring equilibrium. Similar to conventional geysers, the heated medium flows out of the line heater system, which is replaced with cold fluid.


Line Heater Design and Sizing

Our standard line heaters are designed to heat liquids and gases safely at various pressures and temperatures. Each of the systems consists of the following components:

Coils

Also known as a tube bundle are two types: single pass and split pass. The gas or fluid that needs to be heated flows through one or more coils in the system. A line heater consists of two coils, wherein one carries cold fluid into the system, while the other coil rotates to maintain the temperature.

Coil Area

This area refers to the space where the heat is transferred and calculated by considering the surface area of the pipe outside.

Firetube

It is a submerged chamber that is used to fire the heater. Typically, it consists of one or more U-shaped tubes that are flared at one end and connected to the heater bath.

Heater Bath

An indirect heating option is used to heat water or other water-based solutions.

Choke

The choke is a device used to check and control the rate of flow of the fluids in a line heater. It may be located between the coils as per the requirements and type, on the coil outlet, or submerged in the bath.

Sensors and Switches

These are the major heating elements that are used to ensure proper heating of the fluid or gas.

Line Heater Sizing 

The size of the system depends on the following features:

Diameter and length of the coils
Dimension of fire tubes
Thickness of the pipe used in the equipment
Whether or not any particular operating conditions are required

We Provide Gas and Water Line Heaters

Contact Us For Line Heaters  

At your oilfield site, it is essential to have a line heater present at your oilfield site. Using a choked line heater will prevent the creation of ice and hydrates in the line when the pressure is severely reduced at a choke. Without the heating ability of a line heater in Calgary, the flow would be completely shut down.

It is essential to have a line heater present at your oilfield site. Using a choked line heater will prevent the creation of ice and hydrates in the line when the pressure is severely reduced at a choke. Without the heating ability of a line heater, the flow would be completely shut down. 
 
Additionally, in-line or in-line duct heaters can increase the temperature of the line flow, which is useful if the buildup of wax or asphaltenes becomes a common nuisance. Ensure your operation is flowing smoothly by investing in a line heater today.  

 

If you’re looking for efficient gas and water line heaters in Calgary, contact us today!

VISIT OUR LIST OF AVAILABLE GOODS

CALL TODAY TO PLACE AN ORDER

bottom of page